National Cash Register Co. Model 317 S.N.1316746       This Register has been completely & meticulously restored by Tim Harbin. Tim is the 3rd generation in his family to be in the cash register business.He collects and restores antique cash registers for his personal collection only but is offering this one because he has another just like it.   You can click on any of the pictures below for a larger view but you must use your back button to return to this page  

Front View The topsign is a reproduction as well as the marble otherwise the machine is all origional. The dimensions of the bottom are 10"W by 16"D by 21+"H but with the printer door on the side the register is 12"wide.	Rear View
Under the Lid This picture doesn't do justice to the nickel plated dust cover or lid counter but the nickel plating is fabulous! The key labels are replaced but the key rings are origional.	In the Drawer The drawer has been refinished in orange shellac while preserving the origional dealer decal in the drawer.the bill weight has also been re-plated in nickel and the rubber bumper replaced.
The Printer Works! What you ring up is printed on the tape. not many registers are restored with a working printer A spare roll of paper is included	The Parts! As you can see there are quite a few parts inside. All of the parts were cleaned & inspected before assembly. You couldn't ask for a more complete restoration than this!
The Frame These pictures show the framework of the machine during re-assembly. If you look close enough you can see the grease on many of the parts such as the drawer rollers. At this point in construction the machine is about 25% done.

     
All rights are reserved by the Company concerning content on this server (information, materials, images, sounds, etc.). It is strictly prohibited to make use of this content in a secondary manner without notification and permission in any form of reproduction, transfer and sales. It is also prohibited to change or modify the content/descriptions.